If you break your clear lens head light, tail light, brake light, clear reverse light or turn signal you can receive a citation. Keep these kits on hand so you can quickly and easily repair a broken light on your vehicle. Choose the color you need from the drop down box above: Amber, Clear or Red.
If you need all 3 colors, choose the MULTI-PACK for $2.00 more which includes Amber, Clear and Red.
These DIY (Do It Youself) Repair Kits allow you to repair any color auto lens glass in minutes. Easy and fast to use for repairing broken tail lights, turn signals, brake lights, reverse lights, markers, clear lenses, etc.
Simple cut and paste application which provides weather proof seal, restores grid pattern and without needing to remove lens.
QUICK LENS will fix a typical broken tail light lens in place, without removing the housing. The repair panel has a pre-formed grid pattern that closely matches the color and reflective qualities of the lens. Quick Lens mounts quickly and easily on flat or curved surfaces with a special adhesive gasket forming a weather proof seal.
INSTRUCTIONS FOR QUICK LENS REPAIR
1. Remove all loose and broken pieces around damaged area. Clean lens around area thoroughly with dry cloth or paper towel.
2. Hold panel over damaged area to determine size of lens repair panel. Position the pane allowing 1/2 inch over lap on all sides of damage. If size selected needs to be smaller, trim along the inner grid lines.
3. Peel backing from panel and center over area to be repaired. Press the panel to the lens and run your fingers around the edges to insure a good bond.
Made in the USA.